Setup & Install Guide
Nextbase Click&Go PRO Mount - How To Install New 3M Pad
The Ultimate Setup Guide
How to setup your Dash Cam
STEP 1 - GIVE IT SOME JUICE
Charge the Dash Cam via the supplied USB for up to two hours before first use.
STEP 3
Insert microSD card-
Use only Nextbase U3 SD card. Standard SD cards are NOT RECOMMENDED and may adversely affect performance.
STEP 4
Position mount & cables -
Insert Power Cord into mount. Computer USB input located on Dash Cam for convenience.
STEP 5
Route cable and connect power -
Guide the cable around your windshield and make sure to pull the wire through to the base of the Click&Go mount to plug in. Position the Dash Cam correctly.
STEP 6
Follow on
screen instructions
STEP 7
Adjust polarising filter -
For any Dashcam Cam fitted with a polarising filter (522GW & 622GW) this can be adjusted using the rotating bezel to dramatically reduce windshield glare and help produce the perfect image.
WORKS BEST WITH
NEXTBASE SD CARDS
Nextbase Industrial Grade U3 microSD Cards are designed to ensure uninterrupted recording with a high number of write cycles. Non compatible SD Cards will corrupt, causing the Dash Cam to freeze, stop recording, or malfunction.
Recording time
FRONT ONLY
1080p
280 mins
1080p
570 mins
1080p
1130 mins
FRONT & REAR
1080p/720p
200 mins
1080p/720p
395 mins
1080p/720p
790 mins
FRONT ONLY
1440p
140 mins
1440p
270 mins
1440p
545 mins
FRONT & REAR
1440p/720p
115 mins
1440p/720p
230 mins
1440p/720p
460 mins
FRONT ONLY
4K
80 mins
4K
165 mins
4K
330 mins
4K
720 mins
FRONT & REAR
4K/1080p
60 mins
4K/1080p
120 mins
4K/1080p
250 mins
4K/1080p
540 mins
FRONT & REAR
4K/
1080p
60 mins
4K/
1080p
120 mins
4K/
1080p
250 mins
4K/
1080p
540 mins
Nextbase SD Cards
How to Hardwire a Nextbase Dash Cam
Need More Help?
Visit: Technical Support : https://nextbase.au/contact/
Contact Email :support@nextbase.com
Helpline hours:
Monday-Friday 9am-8pm
For all technical related questions, including support, general setup or warranty, please contact our support team.
Thank you.